Search for:

HI93102 Complete Water Analysis Meter

Good Laboratory Practice (GLP) USEPA Compliance Custom Calibration Points The most important parameters needed for water analysis, especially in drinking water are now available in a portable meter.  You can obtain lab performance in the field by using the HI93102.  It not only measures turbidity, but also pH, total and free chlorine, bromine, iodine, iron and cyanuric acid (CYS).  All this in the palm of your hand and in seconds!  Measurements are made quickly and repeatedly through a sophisticated, yet easy-to-use microprocessor.  In colorimetric mode, users can select between factory preprogrammed calibration or calibrating the meter on their own, and measure either concentration or relative absorbance of the sample.  Up to 25 measured samples can be stored in memory together with time and date. HI93102 is supplied complete with glass cuvet, batteries and instructions. We accept credit card and Paypal orders online only from customers in the United States.

Specifications:

Range Turbidity:  0.00 to 9.99 FTU & 0.0 to 50.0 FTU*
           Bromine:  0.00 to 8.00 mg/L
           Free Chlorine:  0.00 to 2.50 mg/L
           Total Chlorine:  0.00 to 3.50 mg/L
           Cyanuric Acid:  0 to 80 mg/L
           Iodine:  0.0 to 12.5 mg/L
           Iron:  0.00 to 1.00 mg/L
           pH:  5.9 to 8.5 pH
Resloution Turbidity:  0.01 & 0.1 NTU
                  Bromine:  0.01 mg/L
                  Free Chlorine:  0.01 mg/L
                  Total Chlorine:  0.01 mg/L
                  Cyanuric Acid:  1 mg/L
                   Iodine:  0.1 mg/L
                   Iron:  0.01 mg/L
                   pH:  0.1 mg/L
Accuracy (@ 20°C/68°F):  Turbidity:  ±0.5% NTU or ±5% of reading (whichever is greater)
                                        Bromine:  ±0.8 mg/L ±3% of reading
                                        Free Chlorine:  ±0.03 mg/L ±3% of reading
                                        Total Chlorine:  ±0.03 mg/L ±3% of reading
                                         Cyanuric Acid:  ±1 mg/L ±15% of reading
                                          Iodine:  ±0.1 mg/L ±5% of reading
                                          Iron:  ±0.02 mg/L ±3% of reading
                                          pH:  ±0.1 pH
Typical EMC Deviation: Turbidity:  ±2% Full Scale
                                      Bromine:  ±0.01 mg/L
                                      Free Chlorine:  ±0.01 mg/L
                                      Total Chlorine:  ±0.01 mg/L
                                      Cyanuric Acid:  ±1 mg/L
                                      Iodine:  ±0.1 mg/L
                                      Iron:  ±0.01 mg/L
                                      pH:  ±0.1 pH
Light Source:  Pure Green LED
Light Life:  Life of the instrument
Light Detector:  Two Silicon Photocells
Battery Type/Life:  4 x 1.5V "AA" batteries/ 60 hours or 1,000 measurements
Environment:  32 to 122°F (0 to 50°C): RH 95%
Dimensions:  8.7 x 3.3 x 1.8" (220 x 83 x 46 mm)
Weight:  18 oz. (510 g)

*1 FTU (Formazine Turbidity Unit) = 1 NTU (Nephelometric Turbidity Unit)

IMPORTANT NOTICE - If you need a product and it has not yet
been set up for on-line purchase, please place your order by
credit card toll-free to 1-800-325-3875.  We will honor the prices
shown on the website.

Any problems or questions call 1-800-325-3875 or Email or fax to 915-852-4084.

 

Prices shown apply to sales to companies within the United States.

For sales outside the US contact Kernco Instruments for appropriate prices for your country.

  Hosting provided by 3N1 Creative  © Kernco Instruments Inc.