Search for:

Dangerous Gas Monitor/Alarm

Low Cost Solution to Monitoring Dangerous Gases and Vapors

• Reliable and maintenance free: state of the art circuitry ensures years of dependable service. Twelve second alarm delay avoids annoying false alarms.
• Accurate: stable temperature compensated sensor
• Easy to calibrate: unit is delivered fully "custom" calibrated to your requirements from the factory. Detailed owner's manual makes subsequent calibration simple.
• Monitors over 100 combustible and toxic gases including: *Acetylene *Ammonia *Butane *Carbon Monoxide *Ethylene *Gasoline *Hydrogen *Hydrogen Sulfide *Methane *Propane *Sulphur Dioxide

The Model SBG200 is capable of monitoring over 100 combustible and toxic gases. It is housed in a rustproof NEMA 2 case which protects the solid state circuitry from damage and yet is small enough (6.75"H x 4.9"W x 2"D) to be mounted wherever needed. It features circuitry to prevent false alarms and provide maintenance free operation. The Color-Coded Taut Band Meter gives reliable indication of background gas and classifies exposure as Safe (green), Warning (yellow) and Danger (red). The flashing light and audible alarm functions can be set to alarm at specific setpoints. The sensor is safe in all environments and cannot be poisoned by overexposure to gases. A remote function contact is provided to connect to central panel or to turn on remote alarms, ventilation units and other emergency devices. The Model SBG200 is powered by a 115V power supply; simply plug it into a normal wall outlet and it supplies the monitor with low voltage DC current making it safe in dangerous atmospheres. Price includes factory calibration and manual.

Specifications

Circuitry: Solid state

Relay Output: 1.5 amps; 120 volts (max)

Power: 115VAC/5.5VDC

Size: 6.75"H x 4.9"W x 2"H

Weight: 2 lbs

Note: Please specify gas/vapor to be detected and desired alarm calibration in ppm (parts per million) or % LEL (lower explosive limit).

_____________________________________________________________________________________________________

Dangerous Gas Leak Detectors

Detects over 125 gases and vapors Easy to use - no calibration required Three sensitive levels - an internal switch can be set for low, medium or high Sensor cannot be poisoned or flood in high concentrations of gas Audible alarm helps locate leaks quickly

The Model 501 Gas Tracer is inexpensive and easy to use. It is designed to indicate the presence of combustible and/or toxic gases by relative magnitude and will quickly pin-point the source of contaminant gas leaks. It responds to gas concentrations well below most OSHA ceilings. With its three switch selectable sensitivity ranges, the Model 501 is capable of detecting the concentration level of some gases as low as 1 ppm. Higher concentrations will correspondingly produce higher meter readings. Other features include battery check, alarm switch for audible signaling of leaks, ABS housing with Lexan meter face and guarded sensor which gives it high impact resistance, solid state sensor designed for over 50,000 exposures and rust proof belt clip for easy no hand carriage. Price includes batteries (Model 501NK: battery and recharger) carrying case and manual.

Specifications

Response Time: 1 second
Recovery Time: 2 seconds
Power:

• Model 501AK:(four 1.5V "AA" batteries)
• Model 501NK (rechargeable battery and charger)

Size: 9" x 4" x 2.25"
Weight: 1 lb

IMPORTANT NOTICE - If you need a product and it has not yet
been set up for on-line purchase, please place your order by
credit card toll-free to 1-800-325-3875.  We will honor the prices
shown on the website.

Any problems or questions call 1-800-325-3875 or Email or fax to 915-852-4084.

 

Prices shown apply to sales to companies within the United States.

For sales outside the US contact Kernco Instruments for appropriate prices for your country.

  Hosting provided by 3N1 Creative  © Kernco Instruments Inc.