FOR COMPLETE INFORMATION AND PRICES

CLICK ON THE LISTINGS BELOW

• Gas Detectors (Multi-purpose) Wall Mounted (Instrinsically Safe, Class I Division I Group BCD for Hazardous Areas) With audio/visual alarms.  Basic unit has a explosion proof sensor with 50 feet cable (longer lengths up to 600 feet available).  Also available are our self contained wall mounted gas detector models where the sensor is inside of the controller housing. Digital display models available.  All models can be supplied with either a 4-20mA or a 0-1 volt output ideal for data acquisition, recording and PLC interfacing.  Multi channels available (from 2 channels up to 10 channels). Measure Ethylene Oxide  *Ethylene  *Freon  *Ammonia  *Sulphur Dioxide  *Carbon Monoxide *Propane  *Hexane  *Methane  *Hydrogen Sulfide  *Chlorine  *Hydrocarbons  *Combustible Gas  and many other gases.  Let us know what you want to measure.
   
• Gas Detectors - Portable
  Will measure the same gases as shown on wall models.  Can be supplied with a 0-1 VDC output.  Can be supplied with digital display as an option.  Rechargeable NiCad batteries provide a 4 VDC power to operate unit up to 10 hours at full charge.  Audio/visual alarms.  Intrinsically safe, Class I, Division I, Group BCD for hazardous areas.
   
• Gas Detectors - Dangerous Gas Monitor/Alarm - The Model SBG200 is capable of monitoring over 100 combustible and toxic gases.
   
• Gas Detectors - Dangerous Gas Leak Detectors - he Model 501 Gas Tracer is inexpensive and easy to use. It is designed to indicate the presence of combustible and/or toxic gases by relative magnitude and will quickly pin-point the source of contaminant gas leaks.
   
• Gas Detectors - Multi-Channel Models - same feature as the multi-purpose models.  Can provide up to 10 channels.  Will measure same gases as wall mounted models.
   
• Gas Detectors - Transmitters with 4-20mA signal output.  4-20mA output signal can be used for many applications, such as recorders, controllers, data acquisition etc.  Supplied with digital display.  Measure same gases as shown on wall mounted and portable models as well as many others. Tell us what you require.
   
• Gas Calibrating (Gas Mixture) Models for calibrating the units.  Recommended for checking calibration at least once every three months (or sooner if needed). Life expectancy -5 to 6 years per cylinder.
   

IMPORTANT NOTICE - If you need a product and it has not yet
been set up for on-line purchase, please place your order by
credit card toll-free to 1-800-325-3875.  We will honor the prices
shown on the website.

Any problems or questions call 1-800-325-3875 or Email or fax to 915-852-4084.

 

Prices shown apply to sales to companies within the United States.

For sales outside the US contact Kernco Instruments for appropriate prices for your country.

 

  Hosting provided by 3N1 Creative  © Kernco Instruments Inc.