Home

Email

PRODUCT LINKS

Anemometers
Air Speed, Temperature and Relative Humidity
    

Event Recorders - Measures downtime & production time

4-20mA Amperometer-Calibrator
Monitor & regulate 4-20mA outputs, Measure currents, LCD display, Calibrate recorders & other features

Dangerous Gas Leak Detectors
Over 100 combustible and toxic gases

Gas Detectors - Wall mounted, visual/audio alarms

Gas Detectors - Portable, visual/audio alarms

Gas Calibrating Kits

Humidity/Temperature Indicators

Humidity/Temperature Transmitters

Industrial Fluids Testers
Coolants, cutting oils, lubricants & other fluids
Optical & digital

Infra-Red Thermometers

Moisture Meters
  
 Paper
   
Cotton

pH/Conductivity Meters

pH Monitors - 4-20mA

pH/mV/Temperature Meters

pH/ORP Electrodes

pH/ORP Simulators

pH/ORP Transmitters

REFRACTOMETERS COMPLETE LINE

Atago Refractometers

Industrial Fluids Testers
Coolants, cutting oils, lubricants & other fluids
Optical & digital

Reichert (Leica) Refractometers
Over 10 models - Brix, salinity, clinical, industrial fluids, bench top Abbe type, brake fluids and battery/coolants

Clinical Refractometers
Measure urine s.g., serum or plasma protein, cupric sulphate s.g. used in hospital labs, vet clinics and other health centers

Digital Desktop Refractometers
    Large 2.5" LCD display, 4 models, 5 Year Warranty, Hi/Low alarm feature

Kernco's Special Refractometers
    Discounts up to 50% on some. 8 different ranges

ATC Refractometers
    Temperature Compensated, 7 different ranges, Large discounts

Kernco's Multi Range Models - 0-72%, 0-80% and 0-90%

New Digital Portable Refractometers, 5 Year warranty, 6 models

Starch Refractometers

Static Meter
Detect static charges
Locate source of static
Hand-held, digital

Stroboscopes
7 Models available

Tachometers
   
Contact Type
   
Contact/Non Contact Type
   
Non-Contact Tachometer Combination Photo    Tachometer/Stroboscope

Turbidity Meters

Ultrasonic Leak Detectors

Vibration Meters

 

Search for:

pH/mV Simulators

Model 8427

Use this multi-featured pH and mV simulator to calibrate your pH and ORP meters and transmitters. The Model 8427 provides the theoretical voltage values of seven pH readings and four ORP/mV signals. Use the temperature dial (0-50° C) to set the solution temperature at which you want to simulate pH values to assure a temperature compensated signal for accurate calibration. The compensation range is adequate for most process and field applications. Other features include a low battery indicator, a leakage indicator to detect bad cable connection and a high impedance button. All connections to the simulator are by means of a BNC connector.
Price includes a BNC to BNC interconnector (36"), battery, and manual.

SPECIFICATIONS

pH Settings: 0.00, 2.00, 4.00, 7.00, 10.00, 12.00, 14.00
mV Settings: -1900 to +1900 in increments of -1900, -350, +1900, +350
Accuracy: ±0.1 pH, ±5 mV at 20° C/68° F
Temp Compensation: Manual 0-50° C, 32-122° F
Output Impedance: 109 Ohms
Power: 1 ea 9V battery; battery life: 100 hours continuous use
Size/Weight: 7.5 x 3.2 x 1.6", 9.6 oz.

We accept credit card and Paypal orders online only from customers
in the United States. 

Catalog No. Model/Description Price  

12T14

Model 8427 pH/mV Simulator

$150.00



 
Model 613
  • High Accuracy
  • All solid state design
  • Easy to read LCD display
  • Long battery life
  • Touch key operations
  • BNC connector

SPECIFICATIONS:

Range: ± 177.5 mV
Accuracy: ± 0.6%
Display Values: +177.5 mV (4.00 pH), 0.0 mV (7.00 pH), -177.5 mV (10.00 pH)
Display: 8mm high LCD
Battery Life: Greater than 100 hrs
Power: 1 ea 9V battery
Size: 6.8 x 1.4 x 1.1" Weight: 6 oz.

Catalog No. Model/Description Price  
12T13 Model 613 pH/mV Simulator $ 94.00
 

 

________________________________________________________________________________________________________________________________
 

pHault Finder - Electrode Simulator
 

  • Simulates pH and mV values; 0-14 in 2 pH increments, ± 414 mV
  • BNC connector, operates by 9-volt battery
  • Tests pH meters, recorders & instruments with mV input
  • Accuracy: 1%

 

When a pH meter has incorrect readings, most likely the problem lies within the electrode. In order to verify
this problem, the pHault Finder can test and calibrate a pH meter by simulating the electrode signal from
0-14 pH in increments of 2 pH units. A high-low impedance switch helps determine if the pH meter's high
impedance has been compromised and also allows calibration of low impedance recorders and meters.


 

Catalog No. Model/Description Price  
12T15 pHault Finder $142.00

____________________________________________________________________________________________________________________________________

4-20mA AMPEROMETER, SIMULATOR AND CALIBRATOR ALL
COMBINED IN A SINGLE MODEL

HI931002 is a portable instrument designed by the plant Repair and Maintenance
Operators for the RMO! This portable simulator can monitor and regulate 4-20 mA
from practically any process meter with or without voltage generator. 
The communication bus from process instrumentation can be simulated in any of the
following modes:

1.  Passive Dirve/Calibrator Mode:
HI931002
can set the 4-20 mA current values and the user can then adjust the process
meter accordingly.
2.  Active Drive/Simulator Mode:
HI931002
simulates the correct current values as above in addition to providing power to the bus
communication. Power is provided through an external adapter (included) which is connected to
the simulator.  This mode is ideal to calibrate chart recorders, pressure transducer or current
indicators.
3. Passive Measurement/Tester Mode:
HI931002
practically becomes an Amperometer.  It measures and displays the mA (or pH) values transmitted
by the process meter.
4.  Active Measurement/Tester Mode:
Same as 3 above in addition to providing voltage to the 4-20 mA bus

HI931002 can practically measure incoming current, provide power and simulate 4-20 mA output to calibrate
your process meter.  A large LCD shows values on the display.  You can select between drive and
measurement modes through a switch on the front panel and two dials allow for quick adjustment of the current.

Another innovative feature of HI931002 is that the battery only serves to power the display and the calibrator
continues to operate without it in the passive modes.

HI931002 is supplied complete with 9V battery, 12VDC adapter, 1 meter (3.3') connection cables

Range:                            2.00 to 19.99 mA & -1.50 to 14.00 pH (active & passive drive mode)
                                    0.00 to 19.99 mA & -3.50 to 14.00 pH (active & passive measuring mode)
Resolution:                                                  0.01 mA & 0.01 pH
Accuracy (@20°C/68°F):                            ±0.01 mA & ±0.01 pH
Input Resistance:                                          20 Ώ
Battery Type/Life:                   1x 9V battery/ 1600 hours approx. of continuous use; 12VDC power supply
Environment:                               0 to 50°C (14 to 122°F); max. RH 95% non-condensing
Dimensions/Weight:                        180 x 83 x 40 mm (7.1 x 3.3 x 1.6") / 320 g (11.27 oz)

Catalog No. Description Price  
HI931002 4-20 mA Amperometer, Simulator and Calibrator $235.00
HI7862/1 Simulator 1 m(3.3') connection cables $  40.00
  NIST Certificate complete with data collection (must be ordered with instrument) $150.00

IMPORTANT NOTICE - If you need a product and it has not yet
been set up for on-line purchase, please place your order by
credit card toll-free to 1-800-325-3875.  We will honor the prices
shown on the website.

Any problems or questions call 1-800-325-3875 or Email or fax to 915-852-4084.

 
Prices shown apply to sales to companies within the United States.
For sales outside the US contact Kernco Instruments for appropriate prices for your country.

 

  Hosting provided by 3N1 Creative  © Kernco Instruments Inc.